Menu

SMS - SubMonitor Starter

Revolutionary Motor Protection

SMS - SubMonitor Starter

Revolutionary Motor Protection

SMS - SubMonitor Starter

Revolutionary Motor Protection

  • 3Ø, 50/60 Hz, 200~600 VAC, 2–150 HP
Equipped with the Franklin Electric SubMonitor overload relay, the SMS provides ideal motor protection for Franklin Electric submersible motors. The SMS also has an array of factory installable options for your specific application.
  • ELECTRONIC OVERLOAD MOTOR PROTECTION
  • Wide range, adjustable, class 5-30 electronic overload
  • Dry pump detection protects your pump and motor from adverse conditions and allows for time-based automatic restart with well recovery mode
  • Industry-leading motor protection for the following conditions: over/under power (dry-run), over/under voltage protection, voltage phase loss, voltage and current phase unbalance, locked rotor, cycle fault, ground fault
  • Easy access to input and output terminals
  • 32-character, backlit, NEMA 4x, wash-down rated screen mounted on front of panel allowing for safe viewing of conditions while motor is running
  • Motor insulation check
  • REAL-TIME & DATE-STAMPED FAULT LOGGING
  • Unit ships with a pre-programmed real time clock with a 10-year battery backup
  • Contains separate fault, configuration change, and start logs. Independent logs allow user to see last fault even if it occurred years ago
  • Fault log tracks 150 faults with date and time stamp accurate down to the second
  • APPLICATION-BASED SETUP
  • SubMonitor Connect is an advanced, comprehensive, 3 phase motor protection relay that allows users to dial in protection and automation with extreme accuracy and parameter depth. However, SubMonitor Connect also has a streamlined Basic Setup Wizard to allows user to get up and running quickly.
  • 9 simple steps to program unit
  • Users select between Submersible, Surface, or Custom and SubMonitor prepopulates protection parameters accordingly
  • Confirm basic motor info, key protection info, time to get started.
  • AUTOMATION READY - ADVANCED PUMP CONTROL
  • 12-240 VAC/VDC wet input for remote start/stop
  • Dry contacts for auto run/shutdown or high float/low float
  • Modbus RTA communication
  • Automatic fault reset and on and off delay settings
  • Well recovery mode
  • HEAVY-DUTY INDUSTRIAL-GRADE CONSTRUCTION
  • Hand-Off-Auto switch rated IP69K for dust tight, high pressure spray-down applications.
  • Outdoor rated, gasketed, powder coated, NEMA 3R enclosure designed in house by FCS to optimize layout and functionality
  • UL 489 circuit breaker disconnect for branch and short circuit protection
  • No fuses required saving time and money
  • Lockable handle
  • Surge Supressor, Universal, Corner Grounded Delta Config.
  • Hand-Off-Auto Key Switch Option
  • Start/Stop Pushbutton Control in lieu of HOA switch
  • Start Pushbutton when HOA in HAND
  • 100VA CPT to accommodate beelow options
  • 120V, 7 Day, 24 Hour Programmable Clock
  • Factory Installed Run Pilot Light, Green, 120VAC
  • Factory Installed Fault Pilot Light, Red, 120VAC

Specs & Documents

Be the first to review this product

Availability: In stock

From: $0.00

To: $13,537.50

Price as configured: $0.00

Please select product spec for SMS - SubMonitor Starter

Don't worry, you can change these later on.

Use a NEMA 1 enclosure when panels are installed in clean, indoor environment. NEMA 3R is a rainproof enclosure meant for outdoor installations.

Enter single or three phase based on the incoming power distribution system.

Check the motor nameplate to find your motor's rated Horsepower

Check the voltage on your motor nameplate. This should be consistent with the supply voltage from your power distribution system.

Check the motor nameplate to find the FLA of the motor. (SFA for submersible motors)

A disconnect provides short circuit protection, and a means of disconnecting power to safely service the application. Disconnects can be locked/tagged out in the open (off) position to ensure the system isn’t energized during service.

  • No Yes
  • No Yes
  • No Yes
  • No Yes
  • No Yes
  • No Yes
  • No Yes
  • No Yes
  • No Yes

* Required Fields

Price as configured: $0.00

  • Please select enter value.