IPS-RV - Intelligent Pump Soft Starter

IPS-RV - Intelligent Pump Soft Starter

IPS-RV - Intelligent Pump Soft Starter

  • 3Ø, 50/60 Hz, 200~600 VAC, 2~250HP
Tru-power™ sensing protects the IPS-RV from dry-run, dead head, runout, and jammed impeller conditions - keeping you online and preventing costly premature pump failure. Along with superior protection, measuring underload using power allows for a more flexible trip range, as opposed to measuring by current, which requires a more precise set point. The end result is the elimination of nuisance trips.
  • Integrated Tru-power™ electronic motor and pump protection
  • Eliminates need for costly pump protection relays
  • Dry pump detection using power (nuisance trip-free) time-based automatic restart and well recovery mode
  • Features a wide-range, adjustable, class 5-30 electronic overload
  • Provides superior motor protection from the following conditions:
  • Over/under power (dry-run)
  • Over/under voltage protection
  • Voltage phase loss
  • Voltage and Current phase unbalance
  • Stalled/locked rotor
  • Cycle fault
  • Ground fault (UL1053 certified)
  • Voltage phase reversal
  • Soft starter features
  • Full HP rated bypass contactor
  • Across-the-line start for emergency situations (turns the soft-starter into a standard IPS)
  • Start modes feature an adjustable current limit, initial voltage, and start time with a torque boost feature
  • Stop modes include: Coast to stop
  • Linear deceleration (reduces water-hammer effect)
  • Adjustable stop voltage and stop time
  • SCR over-temperature detection
  • Shorted SCR detection
  • Built-in power monitoring, fault logging and communications
  • View voltage, current, power factor, and more through an intuitive display
  • Built-in fault log, counter and parameter change log: records last 15 fault types with power condition values, stores how many times each fault type has occurred (up to 255 count), and logs changes to parameter settings (e.g. FLA, OV/UV, under power)
  • Built-in Modbus RTU communications card
  • Easy to setup and use
  • Inside, the display shows an easy to use menu for setting a wealth of parameters. Adjust any protective or control setting in seconds. For example, choose how long to allow for dry well recovery, set run time periods, and On/Off delays. All this with just a few intuitive keystrokes. The IPS-RV ships with factory default settings pre-programmed for optimal submersible pump protection.
  • Industrial grade construction
  • Door mounted heavy-duty HOA switch
  • Housed in an outdoor rated, gasketed, NEMA 3R enclosure
  • Multi-tap control power transformer with integrated secondary protection accommodates common motor voltages. No fuses required!
  • Includes 120 VAC control power for field device
  • Advanced programmable pump control
  • Automatic fault reset
  • Backspin delay - Prevents start-ups into draining systems
  • On and Off delay settings
  • Well recovery mode (up to 48 hours)
  • Minimum run time based on last input
  • 12-120 V input for remote start/stop
  • Dry contact input for remote start/stop
  • Dry contact inputs for float switches
  • Analog input for (selectable) 0-10V, 4-20mA, or 10k thermistor, viewable as a Modbus point
  • Optional circuit breaker disconnect (Service Entrance rated)
  • UL 489 circuit breaker provides branch and short circuit protection
  • No fuses required – saves time and money
  • Lockable handle for safety
  • UL Type 3R enclosures
  • UL Type 4 and 4X (contact factory)
  • Surge suppressor
  • Run pilot light
  • Fault pilot light
  • Shunt trip
  • Start push button control
  • Start/stop push button control (in lieu of hand/off/auto switch)
  • 24 VAC control circuit (in lieu of 120VAC control circuit)

Specs & Documents

Be the first to review this product

Availability: In stock

From: $0.00

To: $15,415.00

Price as configured: $0.00

Please select product spec for IPS-RV - Intelligent Pump Soft Starter

Don't worry, you can change these later on.

A disconnect provides short circuit protection, and a means of disconnecting power to safely service the application. Disconnects can be locked/tagged out in the open (off) position to ensure the system isn’t energized during service.

Use a NEMA 1 enclosure when panels are installed in clean, indoor environment. NEMA 3R is a rainproof enclosure meant for outdoor installations.

Check the motor nameplate to find your motor's rated Horsepower

Enter single or three phase based on the incoming power distribution system.

Check the voltage on your motor nameplate. This should be consistent with the supply voltage from your power distribution system.

Check the motor nameplate to find the FLA of the motor. (SFA for submersible motors)

  • No Yes
  • No Yes
  • No Yes
  • No Yes
  • No Yes
  • No Yes
  • No Yes

Price as configured: $0.00

  • Please select enter value.