93806465C 25PMQP-2.0HP-3RC

Item: 93806465C
Model: 25PMQP-2.0HP-3RC
Type Water Well

Ratings

Phases Three-Phase
Amps - Service Factor 6.4 A
Volts 230 VAC
Voltage Tolerance (%) -10.0% / +10.0%
Wire 3-Wire
Thrust Bearing Rating 650 lb
Motor Submersible
Continuous Duty Yes
Hz 50/60 Hz
Input Phase Single-Phase
Output Phase Three-Phase & Single-Phase 3-Wire
Input Power Factor 0.95
Input Power Max 4200 W
Input voltage single phase (VAC) 230 VAC
Lead Retainer Method Lead Jam Nut
Minimum Motor HP (1 Phase, 3 Wire) 0.5 @ 230 VAC
Maximum Motor HP (1 Phase, 3 Wire) 2 @ 230 VAC
Minimum Output Amps (1 Phase, 3 Wire) 2.0 @ 230VAC
Maximum Output Amps (1 Phase 3 Wire) 13.2 @ 230VAC
Minimum Output Amps (3 Phase) 2.0A @ 230 VAC
Minimum Output Frequency 15Hz (CEN), 30Hz (SUB)
Maximum Output Frequency 60Hz (CEN), 80Hz (SUB)
Maximum Output Current 6.4 A
Output Voltage - 1 Phase, 3 Wire (VAC) 230 VAC
Output Voltage - 3 Phase (VAC) 230 VAC
S.F. 1.25
HP 2 hp-3 hp
Flow 25 gpm
Shut Off 60 Hz 222 ft
Stages 6
Pressure Sensor Included No
Pressure Transducer Included YES
Motor Ambient Temperature Rating Nominal 86 °F
Thrust Bearing Rating 650 lb
Enclosure Rating Type 3R
Minimum Operating Temperature -13 °F
Maximum Operating Temperature 122 °F
Pressure Transducer Included YES
Storage Temperature -13° to 144 °F (-25° to 65 °C)

Liquid

Maximum Fluid Temperature 120 °F

Materials of Construction

Pump Body Material AISI 304 Stainless Steel
Discharge Head Material Stainless Steel
Impeller Material Acetal
Motor Bracket Material Stainless Steel
Check Valve Yes
Intake Screen Material Stainless Steel
Thrust Bearing Kingsbury
Seal Lip Seal Ring
Lead Insulation Material XLPE
Cable Guard Material Stainless Steel
Diaphragm Material Nitrile Rubber (NBR)
Flow Switch Included NO
Motor Construction Design Super Stainless
Shaft Slinger Material Nitrile Rubber (NBR)
Stator/ Motor Shell Material Stainless Steel
Shelf Life 1.5 year

Dimensions

Discharge Threaded - FNPT
Discharge Diameter 1.25 "
Diameter With Cable Guard 3.9 "
Motor Length 11.86 "
Pump Length 14.33 "
Carton Length 29.63 "
Carton Width 10.31 "
Carton Height 19.38 "
Shaft End Spline

Other

Component Drive Part Number 5870205313C
Component Motor Part Number 2340526731S
Component Pump Part Number 93872510
Drinking Water Agency Approvals ANSI/NSF Standard 61
Electrical Agency Approvals cUL Listed / UL
Warranty Standard Time 12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing