BAS - Building Automation Starter

Smarter and more versatile than ever

BAS - Building Automation Starter

Smarter and more versatile than ever

BAS - Building Automation Starter

Smarter and more versatile than ever

  • 3Ø, 200~600V, 1/2-30HP
Equipped with advanced I/O including Fireman’s Override and damper control, the BAS was designed from the ground up for easy integration with automation systems. With a 200 to 600V input and 1-40A adjustable overload, the BAS is the right starter for almost any job.
  • Designed for ease of integration with automation systems
  • Comprehensive inputs/outputs for building automation systems
  • Reduces installation costs
  • High reliability SmartStart patented superior motor protection
  • Electronic overload protection including locked rotor, cycle fault and maximum time to start (due to mis-sized motor or overload)
  • FLA out of calibration indication--ensures installer sets overload correctly based on calculated motor size
  • Advanced control inputs eliminate interposing relays
  • Three dry inputs for auto-run, permissive auto and shutdown
  • Two voltage inputs (12-250VAC) for auto run and fireman’s override
  • Logging retains critical information
  • Logging information is obtainable for starter failure (Factory retrievable only)
  • Last 10 start conditions, including FLA setting, max inrush, run current, time to start, and safety start mode.
  • Last 10 fault conditions, including FLA setting, fault type, fault current, and run time.
  • Universal application
  • Automatically detects voltage (200 to 600VAC)
  • Converts to 24V for control power
  • UL Type 1 and 3R enclosures
  • Lockable enclosure
  • 3R features lockable keypad cover
  • Type 4 & 4X enclosure options available(consult factory)
  • Hand/Off/Auto keypad with LED status indicators
  • Intuitive operation and control with Hand (manual run), Off, and Auto run modes
  • Combination versions include disconnect
  • Motor circuit protection disconnect provides short circuit protection
  • High interrupting ratings for maximum electrical system compatibility
  • No fuses required
  • Lockable handle for safety
  • Motor Circuit Protection disconnect
  • UL Type 1 and 3R enclosures
  • UL Type 4 and 4X (contact factory)

Product videos

Product videos

Specs & Documents

Be the first to review this product

Availability: In stock

From: $613.00

To: $1,375.00

Price as configured: $0.00

Please select product spec for BAS - Building Automation Starter

Don't worry, you can change these later on.

A disconnect provides short circuit protection, and a means of disconnecting power to safely service the application. Disconnects can be locked/tagged out in the open (off) position to ensure the system isn’t energized during service.

Use a NEMA 1 enclosure when panels are installed in clean, indoor environment. NEMA 3R is a rainproof enclosure meant for outdoor installations.

Check the motor nameplate to find your motor's rated Horsepower

Enter single or three phase based on the incoming power distribution system.

Check the voltage on your motor nameplate. This should be consistent with the supply voltage from your power distribution system.

Check the motor nameplate to find the FLA of the motor. (SFA for submersible motors)

* Required Fields

Price as configured: $0.00

  • Please select enter value.
Available in Stores